Triangle EZWire1616 PLC

    Triangle
    - Digital Input16 (24V npn) with green LEDs
    - Digital Output (peak current)16 (24V npn 4A peak. 1A continuous) with red LEDs.
    - Digital I/O ExpansionUp to 128 DI and 128 DO
    - Analog I/O12
            A.I. Interface8 (0-5V. 12-bit)
            A.O. Interface4 (0 to 20mA. 4-20mA. 0-5V. 0-10V)
    - PWM (current)4 (4A peak. 1A continuous)
    - Stepper Motor Controller3 (10.000pps)
    - Stepper Motor Drivers3 (10.000pps)
    - High Speed Counter3 (10 KHz)
    - RS232 ports2 (1 x DCE. 1 x DTE. DB9 male/female)
    - RS485 port (2-wire)1
    - 14-pin LCD port-
    - Ethernet Port1
    - IR Remote Control-
    - Light Dimmer control12
    - Program Flash Memory23.5K words
    - Battery-backed Real Time ClockBuilt-in
    - Non-volatie FRAM6K words built-in
    - Data Flash File1.7M bytes. 435 files built-in
    - Dimension (L x W x H)8.2"x 4.5"x 1.5”
    - Weight0.88 lbs (400g)
    - Operating Temperature-20 to +70 ℃

    pdf-small.gif Data Sheet         pdf-small.gif User's Manual

     

    The EZWire1616 is the first of its kind in the PLC market with integrated. field wiring ready I/O terminals. and provides every digital and analog I/O point with its own power (+24V or +5V) and 0V on a 3-level screwless terminal. Every sensor and actuator in the control system can be wired directly to the PLC without requiring additional screw terminal blocks and wire-harnesses.

    This design saves systems integrators and machine OEMs valuable time. material cost. control panel space and dreaded wiring error recovery effort during installation.

    The EZWire1616 uses TRi's topline SmartTILE-Fx CPU. It supports full floating point computation. non-volatile FRAM. flash file system. battery-backed RTC. Ethernet. RS232. RS485. digital I/Os. 12-bit ADC. 4-20mA DAC. PWM. Stepper controller as well as industry standard Modbus RTU & Modbus TCP protocols.

     

    The EZWire1616 PLC eliminates one of the most labor-intensive operations in professional control panel wiring. which is the need to wire from the PLC's I/O points to a row of screw terminal blocks where control elements such as sensors. switches. actuactors and power device are connected to.

    On the EZWire1616 PLC. every digital and analog I/O point is provided with its own power (+24V or +5V) and 0V on a 3-level screwlessquick-connect terminal (mouse-over the pictures to see the illustrations). Consequently. every sensor and actuator in the control system can thus be wired directly and effortlessly to the PLC! The incredible space and labor saving can be clearly seen in the picture of a sample control panel.
    The EZWire1616 PLC is a compact 3-board arrangement designed to take advantage of TRi's top of the line PLC features. Yet. it allows for sensible maintenance and easy replacement of any faulty sub-board when required. By separating the control and terminal boards. a failed control board can be easily replaced without touching any of the wiring to the terminal board. Occupying a footprint of just 4 1/2" x 8 1/8". this open-board PLC stands 1 1/2" tall. providing extra room in a standard control panel box for other components and lid-side devices (such as HMI) as well as installation and maintenance access.

    Being a newer model introduced in late 2014. the EZWire1616 incorporates many leading edge and time-tested features of TRi's well-established Super PLC series. in particular. the high-end F-series PLCs. It is equipped with 32 Digital I/Os (16 in. 16 out) and 12 Analog I/Os (8 in. 4 out). with expandability of up to 128 D/I and 128 D/O. Outputs will also support up to 4x PWM and up to 3x Stepper Motor Control. Real-time clock and battery backup are all standard features on this PLC.

    Serial communication is enabled through 2x RS232 and 1x RS485 ports supporting Native ASCII Host Link Commands. MODBUS RTU. MODBUS ASCII and OMRON C20 Hostlink Commands. Ethernet is built-in for direct connection to LAN or Internet for purpose of programming. monitoring and remote control. TRi PLCs also readily work in multi-brand control system environments because they support MODBUS/TCP Server and MODBUS/TCP Client.

    The EZWire1616 is programmed with the powerful iTRiLOGI software which has been downloaded more than half a million times by users online for education. training and evaluation. In addition. floating point math computation has been fully enabled.

    Peripherals - 

    MDS100-BW     FP4030MR     U-485     ExcelLink

    £0.00 + vat
    £380.00 + vat
    Availability:In Stock
    Code:EZWire1616
    Quantity
    Add To Your Wishlist

    Want to be notified when this product is back in stock? Complete the form below and we'll send you an email when it is.

    Send to a friend

    Recommend this to a friend by entering their email address in the box below.