E Series PLC		+44 (0) 118 9700010 sales@icc-gb.com
	Home Page Motor Control Gear Switchgear Control/Signalling Devices Motor Protection Relays PLCs Timers & Counters Temperature Controllers MCBs, MCCBs & ACBs Goto...

E10-npn : The World's Smallest Ladder Programmable Controller

Photograph of E10-npn and E10-Relay
E10-npn is Only 5.4cm x 5.4cm x 2.0cm

Check out our specially priced STARTER KITS

"I think the E10-npn is a gem. I work in R&D and machine building for Die-Tech, Inc. ...  the E10 has proven to be a perfect fit for us.  The E10 made the electronics box smaller, cooler running, and more robust. And in the bargain, our manufacturing cost was cut by two-thirds. That's real value in a product.". -  Click here to read what other users say about our PLC products and services

 

Technical Specifications

E10-npn

• 12 to 30V DC Power Supply 
• 6 Inputs with LED Indicators (12~30V DC, NPN type)
• 4 Outputs (each output can sink 1A @ 12~30V DC)
• 8 internal relays+2 internal outputs
• 4 timers (0.1s to 25.4s) 4 counters(1 to 254)
• 1 sequencer with 32 steps (step#0 - #31)
• 90 program steps (1 contact = 1 step)
• Programmable in Ladder Logic software With SIMULATOR.
• Creates ladder program using meaningful names:-
  - Uses simulator to fully test programs on the PC screen before downloading
  - On-line monitoring of all I/O logic states on ladder diagram or on full screen
  - Forced-setting/resetting of i/os can be done directly from computer screen.
  - EEPROM Program Storage (40 years)
  - Screw Terminal Blocks

E10-Relay

• 24V AC (0.3A transformer)
• 6 Inputs with LED Indicators (24V DC, PNP type)
• 4 relay Outputs (2 commons. Each output can switch   2A @ 250V AC)
• All the rest are same as E10-npn.

I. Introduction

Finally, a Programmable Logic Controller so small and cost so little that it can effectively replace all those bulky relays, timers or counters found in your current control panels. Its 24V DC transistor outputs or 0 to 250V AC relay outputs eliminate the need for additional driver circuitry and its incredibly low price means you actually save money while getting a technically superior design for your next control panel project! Despite its simple appearance, the E10 Programmable Logic Controller s share equally sophisticated programming tools with their larger siblings - The H-series PLCs which comprise the T20H with 12 inputs / 8 outputs to the T64H with 40 inputs and 24 outputs.

An E10 Programmable Logic Controller is programmable using an extremely user-friendly ladder logic editor-cum-simulator software - TRiLOGI. TRiLOGI runs on any IBMPC compatible computer. Featuring pull-down menus, pop-up windows and on-line context-sensitive help systems, TRiLOGI is the most user-friendly ladder logic editor available. Its built-in logic SIMULATOR allows you to perform complete off-line testing of your program on your PC screen without connecting to the target PLC. You can immediately verify our claim by downloading the evaluation copy of the TRiLOGI from our Internet Website: http://www.tri.com.sg and finish writing the ladder program for your next project in no time!

II. Hardware Specifications

		E10-Relay	E10-npn
1.	Power Supply	-  AC 24V (current = 0.2A) -  Rectified DC24V availale for    sensor.	- DC 12 to 30V (+ 10% ripple) - Current 0.5~2A (load dependent)
	CPU only current consumption	20mA	20mA
2.	CPU Program Storage Size Average Execution Speed	90 steps stored in EEPROM 20µs per step	90 steps stored in EEPROM 20µs per step
3.	Input Circuits Number of inputs Input Voltage for Logic 0 Input Voltage for Logic 1	6 (PNP type) open circuit or 0 to 3.5V DC 8 to 24V DC	6 (NPN type) open circuit or 8.5V to 24V 0V to +3.5V DC
4.	Output Circuits Number of outputs Peak output current Output Voltage for Logic 1 Inductive back EMF protection	4 2.0A @250VAC or 30VDC per output Dry contact ---- No----	4 Sink 1.0A per output 1.2V @ Iout = 500mA -----yes----
5.	Dimension	7.8cm (L) x 5.6cm (W) x 2.5cm(H)	5.4cm (L) x 5.4cm (W) x 2.0cm(H)
6.	Weight (approximate)	75g	35g

III. Software Features and Programming Methods

• Show Software Features with graphics (70K+ bytes)
• Download a fully functional free copy of TRiLOGI Software for your evaluation!

IV. E10-npn Wiring Diagram

• Click here to view the wiring diagram
• E10-npn  and E10-Relay Installation Guide - "inst-e10.zip" (111K)

V. Starter Kits

To help new users get started quickly, we package Starter Kits for different models of Programmable Logic Controller which includes practically all the hardware and software (except power supply) needed to start using the PLC.