MODEL
DCL(Direct Current Limiter)
Current sensing type
Shunt
Hole Sensor
Current Range
10) 1 - 10mV
05) 0.5 - 5A
50) 5 - 50A
70) 0 - 70mV
100) 10 - 100A
200) 20 - 200A
Operating Time
0.2 - 30 seconds
Accuracy
Current
10%
Time
15% at max set value
Time characteristics
Definite Time
Control Voltage
110/220(200 - 240)VAC 50/60Hz, Dual
# 24/48VAC/DC & Other voltage optional
Relay Output
SPDT, 3A/250VAC, 50/60Hz,resistive
Output mode
Relay deenergized in normal state
Expected relay life
Mechanical : 200,000,000 operations
Electrical : 100,000 operations at rated load
Indication
red LED
Reset
Manual or remote electrical reset with control power interruption.
Auto(instant) reset optional
Environment
Temp.
Run
-20 + 60 
Store
-30 + 70
Humidity
45 ~ 85% RH, non-condsing
Insulation
Between casing and circuits: over 10
DC500V megger
Dielectric strength
1)Between casing & circuits : AC 2,000V, 60Hz, 1min
2)Between open contacts : AC 1,000V, 60Hz, 1min
Current sensor rating & Hole sensor size(ID)
Shunt
50mV at rated currents
Hole
4V at rated currents, sensor ID 20mm
Mounting
Panel
Weight
approximately 175g less sensor