|
Overload Relay |
  |
 +44 (0) 118 9700010 sales@icc-gb.com |
 
|
|
DIGITAL MULTIFUNCTIONAL RELAY, FLUSH MOUNTING TYPE
EOCR-FD
( Electronic Over Current Relay - Digital Definite, Flush
Mounting Type )
Introduction
DIGITAL MULTIFUNCTIONAL PROTECTIVE RELAY BASED
ON MICROPROCESSOR.
(OVERCURRENT, PHASE LOSS, PHASE REVERSE, LOCKED
ROTOR, PHASE UNBALANCE, NVR, MANUAL-RESET & TEST)
1. The real currents of 3 phase are displayed in sequence.
2. Possible setting with volume knob.
(overcurrent, delay time, operating time, alert)
3. High reliability of 95% accuracy.
4. Combined type of Ammeter and OCR.
5. Every trip is identified by LED on the screen.
Power consumption is less than 2W.
6. Alert at 50бн100% of overcurrent setting value.
7. DIP switches enable Fail-safe and phase reverse protection.
8. Bar graph is displayed % of actual current vs current setting.
Usage
Overload protection for motor and other load. Overload, Phase
Loss, Phase Reverse protections for power distribution.
Ordering method
Caution
- Check the preset values of current, delay time, operating time
and alert before starting, and check the operating
conditions of
operating-relay(O.L) and Alert-relay(A.L) then.
- When function SW1 ON, L2 and MC connect to 97 and 98
respectively.
- Confirm the connection cable between Display and P-05/60
(Converter).