Pilot light push button switches

Pilot Lights		+44 (0) 118 9700010 sales@icc-gb.com

Part numbers for this series of non-illuminated push buttons are made up as follows;

Select actuator code (including colour code) from the photos below.

Append contact element code from the "Switch Element" table. The type numbers of contact elements are;

NO:	Actuator mounting : S1		NC :	Actuator mounting : S2
NO:	Individual mounting : S5		NC :	Individual mounting : S6

e.g.

Type 2PSF411 means flush pushbutton, red, with 1NO + 1NC contact elements

Projecting with Resistor		Projecting without Resistor
	2ALRP1		2ALP1
	2ALRP3		2ALP3
	2ALRP4		2ALP4
	2ALRP5		2ALP5
	2ALRP6		2ALP6
	2ALRP7*		2ALP7*
	2ALRP8		2ALP8
	(*clear)		(*clear)
Projecting Push Push with Resistor		Projecting Push Push without Resistor
Pilot Light with Resistor		Pilot Light without Resistor
	2PLBR1		2PLB1
	2PLBR3		2PLB3
	2PLBR4		2PLB4
	2PLBR5		2PLB5
	2PLBR6		2PLB6
	2PLBR7*		2PLB7*
	2PLBR8		2PLB8
	(*clear)		(*clear)

The above type numbers should be followed by the required supply voltage as in the following examples.

Resistance and Diode (with Resistor)
	Voltage AC/DC	Item example & type number
	24V	Pilot Light RED 2PLBR424
	48V	Sel. act. 2 Pos. GREEN 2ASLR3-2P48
	110V	Lum. act. mom. AMBER 2ALRF5110
	230V	Lum. act. mom. YELLOW 2ALRF8230
Direct (without Resistor)
	24V	Pilot Light RED 2PLB424
	48V	Sel. act. 2 Pos. GREEN 2ASL3-2P48
	110V	Lum. act. mom. AMBER 2ALF5110

LED

To order illuminated actuators or pilot lights with LED, please add suffix L to above type nos with resistance and supply voltage AC/DC.
e.g. 2ALRF2L24DC or 2PLBR4L230AC

Variations of switch element assembly on left (L) or right (R) side of actuator bracket for illuminated pushbuttons.


L or R Fig 1	LR Fig 2	L or R Fig 3	LR Fig 4